1. #1
    Just found this on the bay

    1 hour left, wonder what it will go for?

    Just seen they have a little boxford lathe too, too late for me to bid :(

    Nothing is foolproof......to a sufficiently talented fool!

  2. #2
    Actually it's not a router as such.

    It's a mill with no head and a simple holder in it's place.

    Conect used Myford Ml10 lathes for their lathe conversions and the mill is based on the Rishton miller.


    Early machines were on BBC computers and later ones could run off a PC on some DOS based software [ notice that's not advertised with the machine ]

    Electronics are very specialised, custom mother board with daughter boards for steppers and motor controls. Basically that specialised you have to gut it and about the only useable items are the motors and transformer.

    I have just converted a larger version of a Conect Router that was built from extruded sections not unlike what many are building on this forum, about 24" square but with the exact same electrical cabinet. Again gut and replace and it has turned out a nice machine.

    He's a Conect mill I bought recently, note the bed is the same as the Ebay router.

    Got a lathe and mill from a college in Ireland, in storage at the moment whilst I bid for more floor on Ebay

    John S -

  3. #3
    Keep us informed on the going rate of floor on ebay John as I can certainly use some of it!!


Similar Threads

  1. I'm thinking of bidding on a lathe , what do you think it is worth ?
    By Fivetide in forum Marketplace Discussion
    Replies: 17
    Last Post: 22-09-2012, 09:50 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts