ISO15 spindle assembly with holders

[m_c]

Posting this here to see if there's any interest, as I currently have no use for it.

It's a complete ISO15 spindle, with 8 BT15-ER16 tool holders, and air cylinder for the release.







I'm open to offers.

[suesi34e]

Hello m_c,

This bit of kit you have here is interesting to me, in as much as I would like to undertand how such would be set up. It is not the tool for me mind. I am looking for an ATC that will take a 12.7mm / 1/2" collet then someone to build me a router. That said, I bet this will make someone a nice bit of kit. If you have anymore info I would like to have a read up on it just out of interest.

All the best

Suesi

[Jonathan]

I'm guessing it's this one?

https://www.kickstarter.com/projects...le/description

If so, what rated speed are the bearings you got in it? I may be interested...

[Lee Roberts]

I'm guessing it's this one?

https://www.kickstarter.com/projects...le/description

If so, what rated speed are the bearings you got in it? I may be interested...

Not sure if this helps you Jonathan, that kickstarter sure dose look like the right one though:

"The spindle cartridges and spindle shaft kits are supplied with NTN P42 25deg sealed angular contact bearings and are available with optional ceramic bearings at an additional cost."

.Me

[m_c]

Yes, it's the kickstarter spindle, and I only went for the standard bearings, which are supposed to be rated for 15'000rpm.

If it had been delivered on time, I would of had a use for it, however at the moment it's just an expensive shelf decoration unless I happen to find a cheap donor machine.

[Ali Kat]

Yes, it's the kickstarter spindle, and I only went for the standard bearings, which are supposed to be rated for 15'000rpm.

If it had been delivered on time, I would of had a use for it, however at the moment it's just an expensive shelf decoration unless I happen to find a cheap donor machine.

Hi M-C,

Just been reading your posts and I could be interested in this spindle. Can you give an idea of what your after for it?

Cheers

Ali Kat

[m_c]

As it stands, it cost me $1200 plus import tax/VAT.
I know I probably won't get anywhere near that, but I'm not going to let it go for nothing!

Feel free to PM me an offer.

[Jonathan]

Thanks for the info. I think on this occasion I will take note of the difference between 'need' and 'want'.

[JAZZCNC]

Thanks for the info. I think on this occasion I will take note of the difference between 'need' and 'want'.

Oh I really NEED a Haas VF4 SS and even more I WANT UMC750 but ain't going to see either this side of never . . Lol

[Noplace]

Oh I really NEED a Haas VF4 SS and even more I WANT UMC750 but ain't going to see either this side of never . . Lol

why stop at HAAS when you can 'need' a dmg mori or a mazak or a makino