. .
  1. #1
    How about this as a controller cabinet ? It's a Network server cabinet I acquired.
    Click image for larger version. 

Name:	Cab.JPG 
Views:	295 
Size:	175.2 KB 
ID:	16469
    The computer will take up 4 units of the racking and the control electronics will be on an ali plate 750 x 500. That leaves a great space 450W x 500D x 750H, ideal for building in a tool cabinet. This photo is of the back. At the moment there is a steel and smoked acrylic door at the front, which will clip in either front or back.

    If I were building a small machine, this cabinet could house it all.

    Rob

  2. #2
    nice.

    I seem to remember somebody else building theirs into a rack? cant remember who it was, but it was on here....

    hope you are well...

  3. #3
    This week I built a cabinet from an old HP A6000 PC case, some 1/4 MDF and various hardware I had laying around. It worked great. I did this after adding cable chain assemblies and an almost total rebuild of my router which included tandem Y screws and all new motor and ballnut mounts (made by me) and extra Y axis bearings. Now running rapids of 140ipm on X and Y and 200ipm on Z with high acceleration rates.

    Click image for larger version. 

Name:	20151217_152005.jpg 
Views:	228 
Size:	114.1 KB 
ID:	16848Click image for larger version. 

Name:	20151217_152015.jpg 
Views:	211 
Size:	152.5 KB 
ID:	16849Click image for larger version. 

Name:	20151217_152039.jpg 
Views:	220 
Size:	219.9 KB 
ID:	16850


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What cabinet / closet design software?
    By Boyan Silyavski in forum CAD & CAM Software
    Replies: 11
    Last Post: 03-11-2014, 03:37 PM
  2. NEW MEMBER: JoeCNC, from Ireland, cabinet maker.
    By JoeCNC in forum New Member Introductions
    Replies: 6
    Last Post: 21-09-2013, 11:24 PM
  3. VFD in main electronics cabinet/general layout?
    By m_c in forum Spindles & Drive Motors
    Replies: 4
    Last Post: 11-04-2013, 06:00 PM
  4. DIY blast gun cabinet from reclaimed parts
    By martin54 in forum Woodworking Project Showcase
    Replies: 9
    Last Post: 04-04-2013, 11:22 PM
  5. Controller Box
    By M250cnc in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 21-11-2010, 01:34 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •