CSLAB CSMIO/IP-M 4-axis Ethernet Motion Controller

[dudz]

Good to hear.

My PC sometimes freezes in the middle of a job and the motion controller rarely but however does loose communication with the PC, causing unexpected stops. So I need to replace both the motion controller and the PC.

[alboy]

I bought a gigabyte brix compact PC that I have mounted inside the control cabinet, very compact and does the job very well, very low power usage as well.

[dudz]

Just had a look at them. Good idea, but more exp than normal used towers eh ?

[alboy]

Mine cost me 180 Euro with 500gb HD and 4GB ram. didn't think it was too bad, only uses 11watt of power in standby as well. Doesn't come with OS though. (nice avatar by the way, is that your bike?)

[dudz]

Mine cost me 180 Euro with 500gb HD and 4GB ram. didn't think it was too bad, only uses 11watt of power in standby as well. Doesn't come with OS though. (nice avatar by the way, is that your bike?)

Nope, thats a good deal IMO, what speed Processor ?. I will keep my eyes open for such a deal


Avatar is a Ducati 996 (same as I used to have).

[alboy]

Here's the spec of the PC

Brand	Gigabyte
Item Weight	1 Kg
Product Dimensions	19 x 16.6 x 8 cm
Item model number	GB-BXBT-2807-500/4
Series	GB-BXBT-2807
Processor Brand	Intel
Processor Type	Celeron D
Processor Speed	2807 GHz
RAM Size	4 GB
Computer Memory Type	SODIMM
Graphics Card Description	Intel HD Graphics
Operating System	None

More than enough for running MACH3.