Thread: Hey Folks

  1. #1
    Stumbled upon self build cnc machines by accident & it got me intrigued & would like to attempt to build my own mainly for decorative arty stuff.
    I work in the coachbuilding industry mostly as a fabricator / welder so metal working has always interested me.
    This also gives me good access to useful materials @ minimal cost or usually for free.
    At the moment i have the linear rails sorted almost big enuff for a 1000 x 1000 machine bed which i hope to make from aluminum I section.
    I am now looking for info on stepper motors & leadscrews to suit a large table area mostly machining wood, plastics & possible some light aluminium work.
    Any help will be greatly appreciated & im sure i will have many questions along the way
    Cheers for reading
    Hopefully speak to ya's soon
    Robert

  2. #2
    Hi Robert

    Welcome to the forum

    Have a good look around on here, you might find the answer to your questions. If not someone will be along to help you on your way.

    Andy

Similar Threads

  1. NEW MEMBER: Hi Folks form Dorset
    By PatK in forum New Member Introductions
    Replies: 0
    Last Post: 17-09-2011, 09:53 PM
  2. NEW MEMBER: Afternoon folks....
    By Cibbersicks in forum New Member Introductions
    Replies: 0
    Last Post: 22-07-2011, 02:32 PM
  3. NEW MEMBER: hello folks
    By enrique in forum New Member Introductions
    Replies: 0
    Last Post: 10-06-2009, 11:07 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •