Thread: Replacing windows/painting
Threaded View
-
14-11-2015 #1
Hello all,
Taken the windows off of my machine today, was just going to clean them and put them back on but they're got a couple of small cracks on the edges etc. I'm assuming they're just 6mm polycarbonate? Wouldn't be anything else would they? Just seemed odd that the corners had cracked so neatly, almost like glass.
Also decided to pull the front covers off of the ATC assembly because they had no paint left on them, any recommendations for painting machine tool parts? I was just going to wash them, rub them with 600-800 to key them a bit, acetone wipe and then spray with whatever was recommended.
Just want it all to look a bit neater in case I ever need to show a customer. The inside could do with a lick of paint, but it seems incredibly awkward.
Many thanks in advance!
Ross
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Replacing the cuting tools on a Boxford TCL 160
By Saracen in forum Boxford LathesReplies: 7Last Post: 22-01-2016, 12:25 AM -
Replacing motor on small harmonic drive ?
By fabhund in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 23-12-2014, 12:28 PM -
Replacing Chinese screws/nuts with British bought gear.
By Wal in forum Lead Screws, Nuts & SupportsReplies: 4Last Post: 15-11-2014, 11:30 PM -
Replacing Servo motors
By m_c in forum Motor Drivers & ControllersReplies: 15Last Post: 28-04-2013, 12:02 AM -
Mach 2 / 3 - Windows 2000/XP
By teetat in forum Artsoft Mach (3 & 4)Replies: 3Last Post: 10-07-2009, 02:47 PM
Bookmarks