Threaded View
-
27-11-2015 #11
Why do you want a complete computer, for much less money you get a COB Board and can add parts you like. Faster or bigger ram, SSD instead of HDD. I recommend Boards, in which you can use standard Ram chips, instead of the SO-DIMM. The board is inside your electric cabinet and don't need some extra housing. Except you want to mount the Computer behind a touchscreen Monitor, you don,t need an IPC. But single core is enogh for LCNC, it can't use a dual or Quad Core.
I use this, but must wait until I have enough money to work an my machines. The Mesa board run with this, without problems. BTW, you should have a LAN Port.
http://www.asrock.com/mb/Intel/Q1900M/index.de.aspLast edited by uli12us; 27-11-2015 at 09:00 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Mach3 vs LinuxCNC/EMC What do you use and why?
By Lee Roberts in forum Machine Control SoftwareReplies: 46Last Post: 26-11-2013, 01:02 AM -
Ubuntu 10.04 / Linuxcnc / heekscad & heekscnc -installation (steps of what I did)
By diy-john in forum CAD & CAM SoftwareReplies: 5Last Post: 19-06-2013, 07:35 AM -
LinuxCNC and Zapp Automation 3 axis kit - how to configure?
By gr8fun in forum LinuxCNC (EMC)Replies: 12Last Post: 10-04-2013, 09:11 AM -
How many LinuxCNC/EMC users do we have?
By birchy in forum LinuxCNC (EMC)Replies: 16Last Post: 30-12-2012, 08:08 PM -
Setting up LinuxCNC (Linux newbe)
By Mad Professor in forum LinuxCNC (EMC)Replies: 1Last Post: 04-03-2012, 09:22 PM
Bookmarks