Thread: inspiration thread
Threaded View
-
20-01-2016 #20
A recent project - mother of pearl 'Punisher' fret marker inlays for a local guitar maker. They take bloody ages..! (But look alright...)
The smallest end-mill I used was a 0.2mm on the higher markers - thankfully I only broke the one. Very slow feeds - 1.75mm/sec and a 0.75 DOC.
Once installed, the pockets in the pearl will be black-epoxy filled and then sanded back flush to the ebony fingerboard. Looking forward to seeing this coming together - glad I'm not sanding that ebony board, though... For reference - the pockets in the ebony were cut with .08mm clearance - the markers seem to fit very nicely, although I didn't get to push 'em in all the way...
Wal.Last edited by Wal; 20-01-2016 at 07:15 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Moment of Inspiration
By JoeHarris in forum Computer SoftwareReplies: 3Last Post: 04-11-2013, 08:38 PM -
Can't reply to a thread
By Washout in forum General DiscussionReplies: 9Last Post: 24-10-2012, 06:56 PM -
Thread Tapping?
By Tenson in forum Tool & Tooling TechnologyReplies: 6Last Post: 04-05-2012, 04:51 PM -
Thread diameter
By Daniel in forum General DiscussionReplies: 7Last Post: 23-02-2012, 06:18 PM -
Ideas and inspiration....?
By Tom in forum General DiscussionReplies: 20Last Post: 10-08-2010, 01:09 AM
Bookmarks