1. #1
    Newbie from Northern Ireland.
    Hi there I was wondering if anyone could help me with the wiring of a spindle I got from eBay.

  2. #2
    Quote Originally Posted by Davo242 View Post
    Newbie from Northern Ireland.
    Hi there I was wondering if anyone could help me with the wiring of a spindle I got from eBay.
    What is it you need to know
    ..Clive
    The more you know, The better you know, How little you know

  3. #3
    is this a water cooled Chinese spindle or similar? Did you also get the VFD / invertor? This is the power supply to the spindle
    You also need shielded cable with at least 3 cables inside
    You also need a power cable from the mains to the invertor. Some people also put a mains filter in between.

    Show us what you have and there will be plenty of help
    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4

  4. #4
    Click image for larger version. 

Name:	spindle1.jpg 
Views:	60 
Size:	9.5 KB 
ID:	16925Click image for larger version. 

Name:	spindle2.jpg 
Views:	61 
Size:	9.3 KB 
ID:	16926 sorry for delay on getting back. This is the inverter and the bob board

Similar Threads

  1. Chinese 300W DC spindle - is the spindle shaft grounded?
    By HankMcSpank in forum Spindles & Drive Motors
    Replies: 44
    Last Post: 26-11-2016, 07:25 PM
  2. Replies: 5
    Last Post: 29-09-2014, 02:42 PM
  3. Replies: 0
    Last Post: 13-11-2013, 07:50 PM
  4. VFD Cable and 2.2kw spindle wiring
    By Flamered in forum Spindles & Drive Motors
    Replies: 7
    Last Post: 24-08-2012, 07:29 PM
  5. DIY Spindle - What type of bearings are best suited for a spindle.
    By 8iggles in forum Spindles & Drive Motors
    Replies: 18
    Last Post: 09-02-2011, 10:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •