Hi,

I have an aluminium enclosure (See below) which requires the end plates to be machined.

Click image for larger version. 

Name:	Enclosure.JPG 
Views:	72 
Size:	34.9 KB 
ID:	16817

Click image for larger version. 

Name:	Cad enclosure.JPG 
Views:	78 
Size:	50.1 KB 
ID:	16816

Part A (Front Plate)

* I can provide this plate if it is more cost effective than to re-create it from scratch.
* All internal corners have a 1mm radius. I can increase this a little if required?
* Outer Dimensions: 212mm x 70mm
* Quantity: 1

Click image for larger version. 

Name:	Front Plate.JPG 
Views:	90 
Size:	39.7 KB 
ID:	16814

Part B (Rear Plate)

* I cannot supply the material for this plate as it already has some cut-outs which are in the wrong place.
* Again, all internal corners have a 1mm radius.
* 3mm Aluminium.
* Colour: Anodised black would be ideal, however mill finished aluminium is fine (I can paint it at a later date).
* Outer dimensions: 177mm x 65mm
* Quantity: 1

Click image for larger version. 

Name:	Rear Plate.JPG 
Views:	72 
Size:	18.1 KB 
ID:	16815

Please drop me a message on here if interested.

Thanks,

Dave