Thread: Here we go again . . . MK4
-
02-08-2017 #131
This cnc build porn must stop!
(Please keep it coming).
-
Look forward to seeing the lathe work, will you be video'iiinngg it as you machine it?
Still lots to do but another step closer.
-
The Following 2 Users Say Thank You to routercnc For This Useful Post:
-
I've decided to do another video, which takes much longer to put together so let me know if this is better than posting pictures.
In this video I attempt to align the 4 rails flat and parallel to each other. They still need lateral spacing/alignment but that will be the next step when it is assembled into the Y axis and they are trammed in. Here are the edited highlights:
-
The Following User Says Thank You to routercnc For This Useful Post:
-
Patience of a saint very nice vid
..Clive
The more you know, The better you know, How little you know
-
14-08-2017 #135http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm
If you didn't buy it from China the company you bought it from did ;)
-
14-08-2017 #136
great work, with the level of attention you are paying to the details this is going to be a very impressive machine at the end!
-
Cheers for the encouragement Clive, Desertboy, Zeeflyboy.
Next up will be re-machining another 1 mm off the Y axis pockets to correct the small CAD error I mentioned earlier, then assembly/alignment of the Z and Y axis. Hopefully no more surprises!
-
15-08-2017 #138
there are always more surprises!
-
More progress on the Z axis.
Finishing touches, lateral rail alignment, and fitting the ballscrew.
-
Beautiful, very nice big credit
..Clive
The more you know, The better you know, How little you know
Thread Information
Users Browsing this Thread
There are currently 19 users browsing this thread. (0 members and 19 guests)
Bookmarks