-
07-11-2016 #121
-
07-11-2016 #122
Just looking at the options. It would be good if someone else had had one and could offer any thoughts...
Sent from my iPhone using Tapatalk
-
07-11-2016 #123
Invertek optidrives are excellent, I have fitted several in the past, easy to configure, built in Wales i recall, I get mine from Inverterdrive.com, really good tech help too there.
-
The Following 2 Users Say Thank You to Davek0974 For This Useful Post:
-
07-11-2016 #124
What do you reckon Joe, £170 Inc vat?
https://inverterdrive.com/group/AC-I...-1ph-3ph-IP20/
Thanks for the share Dave, the USB lead looks a bit pricey if you ask me, should get that with the drive no?Last edited by Lee Roberts; 07-11-2016 at 07:29 PM.
.Me
-
07-11-2016 #125
I didn't get any leads, never needed one either?
;)
-
07-11-2016 #126
Thanks guys, wouldn't have even known where to start if it wasn't for all the help on this forum!!
Please find attached updated schematics, fingers crossed 3rd time lucky?
SchematicsLast edited by examorph; 09-12-2016 at 01:01 AM.
-
07-11-2016 #127
-
07-11-2016 #128
-
The Following User Says Thank You to JAZZCNC For This Useful Post:
-
07-11-2016 #129
-
07-11-2016 #130
Mainly because No Isolation on Analog. But other smaller niggles are No RPM readout only Khz. Only 12Vdc output not 24Vdc for controlling external devices And I'm not sure but think it doesnt have onboard relay but been while since fitted one so may be wrong.
Then in general didn't like the build quality and the Manual was Crap.!
Huanyang Vfd's have got much better in recent years and now come with half decent paper manual. However they still have longway to catch up with likes of Invertek or IMO etc.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: First Build 5 x 12 Steel Frame CNC router
By Scott Damman in forum DIY Router Build LogsReplies: 104Last Post: 18-01-2017, 06:36 PM -
BUILD LOG: New Build, Aluminium Frame Router/Mill
By Davek0974 in forum DIY Router Build LogsReplies: 101Last Post: 31-08-2016, 05:28 PM -
BUILD LOG: Steel frame cnc router design/build
By CraftyGeek in forum DIY Router Build LogsReplies: 110Last Post: 06-05-2015, 10:00 PM -
BUILD LOG: First steel diy CNC router build
By ivars211 in forum DIY Router Build LogsReplies: 59Last Post: 28-07-2014, 08:29 PM -
BUILD LOG: 7' X 4' Steel frame build
By Ricardoco in forum DIY Router Build LogsReplies: 6Last Post: 28-10-2012, 06:02 PM
Bookmarks