. .
Page 8 of 8 FirstFirst ... 678
  1. #71
    I am interested to buy license for kay cnc. Br : Dariosh

  2. #72
    Quote Originally Posted by mchipser View Post
    I was able to get the X and Y axis running last night.. I will hopefully have enough time tonight to finish the Z axis.. I'm still not sure on how to setup the micro stepping and the motor velocity in mach3 (cause I don't know what values to use)

    Anyway, here it is moving.. https://youtu.be/iSry6ZRe8bI

    Attachment 24432
    What model are the Stepper Motor Driver Controller you put ?

  3. #73
    Quote Originally Posted by MarMix View Post
    What model are the Stepper Motor Driver Controller you put ?
    The picture appears to show Stepper Online DM542Ts.

    https://www.omc-stepperonline.com/di...or-dm542t.html

  4. #74
    I have the GALAAD license so i don't know i must test if the original board on the machine it move fast enough, if is slow version, then i will update to mach3, i wait for the USB to rs232 adapter to come, to do some tests

  5. #75
    Steppers motors are STP-57D13-01 1.8 DEG/STEP 2.5V 3.0A

  6. #76
    Fcnc's Avatar
    Lives in Paris, France. Last Activity: 21-03-2021 Has been a member for 1-2 years. Has a total post count of 2.
    Hi guys,
    the subject is a little dated, but I am looking for information and especially help.
    I just bought an ICP4030, same machine but bigger and more resent.
    I want to do the exact same retrofit : UC400ETH + BOB + UCCNC

    I am looking for information on how to wire the machine
    Someone to help me ?
    @mchipser ?
    @Steve-m ?

    Thks !!

  7. #77
    Don't do any modifications, it works fine, i use mine with galaad and old desktop with serial port. All you do you make the design on any pc and you load and run the file from older pc with serial port connected to the machine, there is a schematic in pdf for whole pcb, if you google it, you will find it, check images and all when you google, like search type all, and images

  8. #78
    Fcnc's Avatar
    Lives in Paris, France. Last Activity: 21-03-2021 Has been a member for 1-2 years. Has a total post count of 2.
    Thks MarMix, but i'll do it.
    I don't have Galaad, and I would rather pay for a UCCNC license than Galaad.
    I have the pdf of the pcb, but it does not bring me anything.
    I'm looking for how to identify the wires that go from the Nema to the drivers.

Page 8 of 8 FirstFirst ... 678

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Vevor 3020 cnc Autolevelling
    By iBeta in forum Machine Discussion
    Replies: 8
    Last Post: 22-11-2015, 07:08 PM
  2. DIY 3020 CNC I/O Board
    By Pointy in forum Electronic Project Building
    Replies: 10
    Last Post: 27-07-2015, 10:48 PM
  3. NCStudio to Mach3 question for a chinese 3020 router
    By Fivetide in forum Chinese Machines
    Replies: 3
    Last Post: 11-04-2015, 10:37 PM
  4. is a cnc 3020 right for the jobs i need doing
    By RsvRcarl in forum Milling Machines, Builds & Conversions
    Replies: 3
    Last Post: 28-03-2012, 01:34 AM
  5. Improving your CNC3040/3020
    By DanielF in forum Motor Drivers & Controllers
    Replies: 0
    Last Post: 22-11-2011, 01:48 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •