. .
Page 7 of 8 FirstFirst ... 5678 LastLast
  1. #61
    Quote Originally Posted by njhussey View Post
    Looking good Chris....Tele soon? 
    Thanks Neil and yes Tele Soon

    I've been trying to do some research on the neck of Andy Summer's guitar and it looks like it has a heel adjusted truss rod, but still retains the headstock hole but plugged with a walnut blank. Once I have that sorted out I can begin the CAD/CAM for it. I normally use the TDPRI forums for this stuff, but have drawn a blank so far.

    BTW - Do you use Fusion 360 now? If I get some time this week, I'll maybe start the CAD/CAM and then I could give you permissions on the project and try out the collaboration side of the software/cloud.

    Cheers

    Chris

  2. #62
    I don't yet but I use Geomagic so I'm sure I'll pick it up quickly enough...I've downloaded it I think, just need to have a play!
    Neil...

    Build log...here

  3. #63
    Quote Originally Posted by Washout View Post
    BTW - Do you use Fusion 360 now? If I get some time this week, I'll maybe start the CAD/CAM and then I could give you permissions on the project and try out the collaboration side of the software/cloud.

    Cheers

    Chris
    I do !
    .Me

  4. #64
    Quote Originally Posted by Lee Roberts View Post
    I do !
    Could be the start of a MYCNCUK community project then :-)

  5. #65
    and the next part is up - attaching the necks (no CNC this time):


  6. #66
    Played a Jaguar yesterday in Andertons in Guildford....lovely guitars....my playing didn't do it justice at all...was a bit ashamed really!! Also played a tele...................
    Neil...

    Build log...here

  7. #67
    Yes the Jaguar is very underrated/overshadowed by the Tele and Strat - probably because the setup can be a bit fiddly and I only caught onto them by chance having ignored them for years.

    So long as you didn't play Stairway I'm sure it was all good :-)

  8. #68
    Quote Originally Posted by Washout View Post
    So long as you didn't play Stairway I'm sure it was all good :-)
    Nooooooooooooo.....bonjovi wanted dead or alive, oasis don't look back in anger...by which time the tips of my fingers were hurting as I've not played for months
    Neil...

    Build log...here

  9. #69
    Almost there (actually the guitars are finished but the video editing is not) - this week its electricals and funnily building a CNC enclosure was helpful, as its all in the grounding with guitars as well:


  10. #70
    And the Jaaaaags are done finally:



    Telecaster next :)

Page 7 of 8 FirstFirst ... 5678 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Guitar Hero Meets, T-Slotted Profiles !!!
    By Lee Roberts in forum General Discussion
    Replies: 4
    Last Post: 24-04-2019, 12:20 AM
  2. NEW MEMBER: Newbie seeking CNC info for guitar building
    By rusty999 in forum New Member Introductions
    Replies: 4
    Last Post: 15-01-2016, 02:26 PM
  3. FOR SALE: CNC project
    By amxen in forum Items For Sale
    Replies: 1
    Last Post: 20-12-2015, 09:19 PM
  4. New project - Aluminium Guitar Nut Height Gauge
    By Washout in forum Metalwork Project Showcase
    Replies: 11
    Last Post: 08-10-2015, 10:04 AM
  5. NEW MEMBER: Back after a little rest
    By bogstandard in forum New Member Introductions
    Replies: 3
    Last Post: 27-02-2015, 07:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •