. .
  1. #1
    Evening All,

    Autodesk have tried to help but I am over 7 almost 8 hours of trying to get itinstalled and no further along than when I started. Fushion 360 was put on mymachine prior to having Norton. Since the install of Norton the free trial ofFushion expired so I took it off on the understanding if I reinstalled I couldkeep the software for year on re-registering.

    If you have got this far reading my message you have probably grasped that I amno wiz kid on computers but I think there must be an easier way. I think theissue may be something to do with Norton then again it could just be me goingwrong. A couple more hours of trying and I think I will have to send the PC tothe computer engineer.

    Thanks for any thoughts

    Steve


  2. #2
    Hi Steve,

    Fusion should ask you whether you want to buy ths software or something. At that point it will give you the option to say that you are a startup or hobbyist.

    Norton may be blocking some of the ports that Fusion uses to access the "Cloud" so worth googling if others are seeing this issue
    https://emvioeng.com
    Machine tools and 3D printing supplies. Expanding constantly.

  3. #3
    Hi Komatias,

    Tar very much for the reply and adivce. Yes, it states the startup option it all looks like it is fine then at 2% in on probably the first 15 attempts it stops and comes up with Invalid entry Erronn 13 and a load of stuff I have no idea on! Later attempts got to 1% and failed in a similar way so not good. I think it is dam Norton I have tried to turn off parts of Norton but I have no idea what I am turning off! I am going to have some explaining to do if I take the computer to the engineer who told me not to put it on, that much I do know. I did not want to leave it on the side mind having brought it.

    Thanks for the help

    Steve

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Installing Huanyung VFD on Heiz Zero3 Controller
    By artmin in forum Heiz CNC Routers
    Replies: 16
    Last Post: 16-09-2021, 01:25 PM
  2. Installing Mach 3 is driving me mad!
    By tonygagey in forum Artsoft Mach (3 & 4)
    Replies: 16
    Last Post: 13-07-2015, 01:20 PM
  3. Reversed axis on a AXYZ 6010 after installing DNC controller software...
    By RickyThunders in forum Machine Control Software
    Replies: 1
    Last Post: 12-02-2013, 03:56 AM
  4. Options for installing linear guide rails ?
    By flanagaj in forum Gantry/Router Machines & Building
    Replies: 8
    Last Post: 15-10-2011, 12:09 AM
  5. Installing Mitsubishi inverter FR-E520S-2.2K-EC
    By Colin Barron in forum Motor Drivers & Controllers
    Replies: 5
    Last Post: 25-09-2010, 07:02 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •