Threaded View
-
12-02-2016 #1
Hi all. I'm successfully using an Emco PC MILL55 with the original hardware (pc RS422 card) and winnc software V13.62 emulating a Fanuc O-M controller. I'm using the pc keyboard to control the machine but the original 'software description' book, edition H2001-8 I have, leaves a lot of detail to be desired. In particular, I'm stuck on the key sequence to enable incremental jog ; I've tried most possible combinations of cntl/shift/alt along with the 'top row' numbers 1 to 4 as indicated in the book but nothing seems to work. Is anyone able to help me in this area please ? I'm able to jog as expected in 'normal jog' mode and am able to alter feed rates, and therefore jog speed ok. I'm unable to get the Genius digitizer tablet and overlay working to see if the 'incremental jog' function works with that - but that's another story. Any help appreciated.
Peter
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
keyboard interface problem (Denford lathe)
By asto in forum Denford LathesReplies: 0Last Post: 29-07-2015, 06:38 PM -
RFQ: Prototype keyboard case - CNC and laser
By Photekq in forum Projects, Jobs & RequestsReplies: 1Last Post: 26-05-2013, 08:18 PM -
Mach3 custom USB Keyboard
By rnr107 in forum Electronic Project BuildingReplies: 28Last Post: 21-06-2012, 02:53 PM -
Cheap Monitor and Keyboard arm at CPC
By Musht in forum MonitorsReplies: 6Last Post: 12-05-2012, 12:58 AM -
This tiny keyboard might come in handy :)
By Smiler in forum Gantry/Router Machines & BuildingReplies: 0Last Post: 28-12-2009, 06:30 PM
Bookmarks