Limits, homes, override switch

[valdis034]

No Don't use any relay for Home switches just connect direct to the Input pin or pins. The Relay cause a delay and makes homing unrelaible.

You can share one Input for all Home switches provided you use the correct switch type and connection.

If your wanting to share the Switch for both Home and Limits then you can't using the Relay approach for the above reason.

How about using solid state relay? It doesnt have moving parts so no delay or it is very very tiny?

Išsiųsta naudojantis SM-G900F Tapatalk 4 Lt

[JAZZCNC]

How about using solid state relay? It doesnt have moving parts so no delay or it is very very tiny?

Išsiųsta naudojantis SM-G900F Tapatalk 4 Lt

Better but still not recommended or required. STR's also tend to fail in the on state which isn't good either.