. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-07-2017 #27
    Desertboy's Avatar
    Lives in Leicester, United Kingdom.
    Desertboy
    Last Activity: 1 Day Ago Has been a member for 6-7 years. Has a total post count of 986. Received thanks 84 times, giving thanks to others 751 times.
    Quote Originally Posted by Chaz View Post
    Ok, problems getting a cooling system for the spindle to work.

    The chiller I got from AndrewMawson is way too powerful and it blows the piping off when it starts up. So unless I get some form of bypass valve or control valve, its not going to work.

    I tried a few pumps from Amazon, typically used for fish tanks, they are all too weak. Looking at PC water cooling kits but they are pricy. Can anyone suggest a pump that will work with 6mm piping?

    Thanks
    should be fine I'm using standard fish tank pump with a 13mm reducer the main thing is the head height and you have 2.5m which should be more than enough.

    The chiller does it have it's own pump?
    Last edited by Desertboy; 03-07-2017 at 01:56 PM.
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules