. .
Page 1 of 2 12 LastLast
  1. #1
    Hi all,

    Was just hoping someone had a post for tnc 145, im using inventor hsm 2.5D. Downloaded a few tnc 151 & 155 posts but they all seem to be a mile off and i haven't done any editing before.

    Thanks in advance!

    Jack

  2. #2
    I moved from Fusion 360 as sorting post processors for my TNC355 was a BIG headache. I wanted to do 4th axis work but the way the CAM side was written was a nightmare

    I bought CAMBAM - a far simpler product with nothing like the Fusion sophistication, but it worked and altering Post P's was much easier !!!

    Don't forget that post processors are specific to the CAM package you are using
    Last edited by AndrewMawson; 01-03-2016 at 08:37 PM.

  3. #3
    I've looked into cambam before, but as far as im aware it only converts to G-code? The TNC 145 can only read "heidenhain language".

    Cheers,

  4. #4
    Ade Vickers modified a post for his TNC151 using conversational code - it's on the CamBam forum - just search for Heidenhain


    http://www.cambam.co.uk/forum/index.php?board=16.0

    Chap here using a TNC145:

    http://www.cambam.co.uk/forum/index....26288#msg26288
    Last edited by AndrewMawson; 02-03-2016 at 01:06 PM.

  5. The Following User Says Thank You to AndrewMawson For This Useful Post:


  6. #5
    Finally got it working! used Ade's 151 post processor took quite a lot of modifying to work for the 145 hey ho i now have a cam bam'd name-plate!

    Chuffed to bits.

    The circle was a mistake but it still looks neat. :)

    Thanks for all the help.

    Cheers,

    Jack

    Click image for larger version. 

Name:	IMAG0970.jpg 
Views:	2790 
Size:	190.5 KB 
ID:	17784Click image for larger version. 

Name:	IMAG0971.jpg 
Views:	2790 
Size:	223.0 KB 
ID:	17785

  7. #6
    Good to hear a +ve result !

  8. #7
    steffeb's Avatar
    Lives in Borlänge, Sweden. Last Activity: 21 Hours Ago Has been a member for 7-8 years. Has a total post count of 4.
    Are you willing to share your TNC 145 postprocessor on the cambam forum ? I would really appreciate it. :)

  9. #8
    Share it here too !

    .Me
    .Me

  10. #9
    Hiya guys, sorry for the late reply! Im struggling to find the location of the file... i modified it all in CAMBAM?? Also, im not a member of cambam forum but perhaps you could post it over if i post it here steffeb?

  11. #10
    steffeb's Avatar
    Lives in Borlänge, Sweden. Last Activity: 21 Hours Ago Has been a member for 7-8 years. Has a total post count of 4.
    Thanks! I can post it on the cambam forum. :)

    You find the file i in the "Tools" meny, and then "view program directory" or something like that. I'm at work now, got no access to cambam. It is on the right of the top menu bar anyway, you'll find it! Then it's located in the "post" directory. Had a hard time to get the TNC 151 post running before i found that directory. :)
    Last edited by steffeb; 12-04-2016 at 12:06 PM.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Bridgeport VMC with Heidenhain control-
    By vargai in forum Gantry/Router Machines & Building
    Replies: 3
    Last Post: 13-01-2015, 02:37 PM
  2. Help with Post Processor
    By superpot in forum CAD & CAM Software
    Replies: 0
    Last Post: 20-11-2013, 11:23 AM
  3. Heidenhain DRO fault
    By Lancer in forum General Electronics
    Replies: 5
    Last Post: 29-06-2012, 09:57 AM
  4. Vectric Post Processor
    By p1lts in forum General Discussion
    Replies: 2
    Last Post: 08-10-2011, 08:02 PM
  5. Post processor Sei
    By 2006Nobull in forum Machine Discussion
    Replies: 12
    Last Post: 04-08-2011, 12:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •