Threaded View
-
14-04-2016 #11
Thanks for the thoughts on mounting the VFD to the gantry. I had kinda thought about those items as well, the main driver for me was actually 3 phase switching noise caused by the VFD. I use double shielded VFD cable but at these high frequencies (300 - 400Hz AC at 2.5khz switching) there can be alot of noise that causes interference elsewhere in the home. Anyway I have scrapped the idea in favor of wall mounted.
Finally some updates on the machine.
X axis motor mount plates (laser cut) and servo motor mocked up.
Long ballscrew mocked up for bracket design
Also made some good headway on the electrics. Still cant get CSMIO to connect so will have to contact them here soon but Im a bit of time away from needing it.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: First time build - Steel Frame CNC Router
By examorph in forum DIY Router Build LogsReplies: 144Last Post: 19-10-2023, 06:25 PM -
BUILD LOG: New Build, Aluminium Frame Router/Mill
By Davek0974 in forum DIY Router Build LogsReplies: 101Last Post: 31-08-2016, 05:28 PM -
BUILD LOG: Steel frame cnc router design/build
By CraftyGeek in forum DIY Router Build LogsReplies: 110Last Post: 06-05-2015, 10:00 PM -
BUILD LOG: First steel diy CNC router build
By ivars211 in forum DIY Router Build LogsReplies: 59Last Post: 28-07-2014, 08:29 PM -
BUILD LOG: 7' X 4' Steel frame build
By Ricardoco in forum DIY Router Build LogsReplies: 6Last Post: 28-10-2012, 06:02 PM
Bookmarks