. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Wondering if anyone can point me in the right direction on how to wire my spindle to mach3. At the minute I'm controlling it manually.
    Last edited by Duffman; 11-03-2016 at 12:24 AM.

  2. #2
    Will need more info. What spindle you got and what breakout board
    https://emvioeng.com
    Machine tools and 3D printing supplies. Expanding constantly.

  3. #3
    Trying to get pic uploaded but they won't go on. I will try from the laptop when I get to workshop.

  4. #4
    I'm going out on a limb here - you have a 1.5 or 2.2kw spindle and vfd from eBay or aliexpress etc???

    Do you want speed control or just on/off control??

    If you google Huanyang vfd Mach3 you should get some results.

    As i said though - this is all presumption but this is a very common combination.

  5. #5
    Click image for larger version. 

Name:	bob.JPG 
Views:	308 
Size:	187.2 KB 
ID:	17905Click image for larger version. 

Name:	bob2.JPG 
Views:	494 
Size:	46.7 KB 
ID:	17906Click image for larger version. 

Name:	spindle.JPG 
Views:	330 
Size:	118.1 KB 
ID:	17907the spindle is a 2.2kw air cooled from ebay along with the vfd. Breakout board is also from ebay

  6. #6
    That BOB does not have the ability to run the spindle speed control but it can be made to switch the spindle on and off.

    Have a look on Eurikain's thread about electrical stuff. I seem to remember Jazz had describe the pins you need to connect up to the BOB's relay.
    https://emvioeng.com
    Machine tools and 3D printing supplies. Expanding constantly.

  7. #7
    I'm lost too

  8. #8
    Can I also wire manually as I'm using a cheapo cnc from China 3040. It was mentioned in the instructions that I should not do it as it can damage the controller

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How to connect 2.2KW Inverter VFD?
    By Tenson in forum Spindles & Drive Motors
    Replies: 20
    Last Post: 13-07-2020, 01:47 PM
  2. Replies: 5
    Last Post: 04-02-2016, 08:51 PM
  3. Connect 121 revamp
    By Miller in forum Conect Lathes
    Replies: 2
    Last Post: 16-10-2014, 05:42 PM
  4. Mach lathe spindle speed control
    By GeoffV in forum Artsoft Mach (3 & 4)
    Replies: 7
    Last Post: 21-05-2014, 08:34 AM
  5. How to connect my driver to my steppers
    By speedhound in forum Gantry/Router Machines & Building
    Replies: 9
    Last Post: 16-01-2011, 02:52 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •