. .
Page 4 of 19 FirstFirst ... 2345614 ... LastLast
  1. #31
    When running Mach3 without the parallel port driver installed, a lot of things don't work correctly.
    Gerry
    ______________________________________________
    UCCNC 2022 Screenset

    Mach3 2010 Screenset

    JointCAM - CAM for Woodworking Joints

  2. #32
    That explains it then, thanks.

  3. #33
    Dave do your self a Favor and Buy Gerry's (Ger21) Screen set and make touch plate. Worth every penny and will save you hours of messing around with setting Z height etc. Much much nicer than 1024 screen set.

    You'll find link at bottom Gerry's post.

  4. #34
    Done, looks very nice indeed.

    Do you get commission ;)

    Thanks

  5. #35
    Quote Originally Posted by Davek0974 View Post
    Do you get commission ;)
    You kinding the Man has helped Me(and 1000's others) so much over the years I'd need to recommend him to million users before got near to being worthy of commision...

  6. #36
    Some good people on here, no two ways about it

  7. #37
    Quote Originally Posted by JAZZCNC View Post
    Dave do your self a Favor and Buy Gerry's (Ger21) Screen set and make touch plate. Worth every penny and will save you hours of messing around with setting Z height etc. Much much nicer than 1024 screen set.

    You'll find link at bottom Gerry's post.

    Watched the videos, nicely presented and explained, looks a great screen set, can't wait to get my hands on it ;)

  8. #38
    Been using it for ages as well and it's well worth it.

    The probe function page is great with everything you can think of.

    Just watch your monitor size - mine is 15" and the fonts can be a bit fuzzy. This is explained in the link and there is a preferred monitor/resolution size if I remember correctly. Even fuzzy it's still a good screenset.
    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4

  9. #39
    Turn off Auto screen enlarge and they won't be fuzzy. I use an old 15" monitor myself.
    Gerry
    ______________________________________________
    UCCNC 2022 Screenset

    Mach3 2010 Screenset

    JointCAM - CAM for Woodworking Joints

  10. #40
    Arrived last night, looks money well spent, nice one.

    Day off today, out in the shop, get the thing going :)

Page 4 of 19 FirstFirst ... 2345614 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Beginner Moving Gantry Build? Read This!
    By Tenson in forum Gantry/Router Machines & Building
    Replies: 3
    Last Post: 23-05-2018, 05:30 PM
  2. Garage CNC - A gantry style machine design
    By fandango in forum Gantry/Router Machines & Building
    Replies: 14
    Last Post: 21-03-2014, 01:38 AM
  3. Truss style Gantry
    By D.C. in forum Gantry/Router Machines & Building
    Replies: 28
    Last Post: 15-12-2012, 07:23 PM
  4. A few questions to start a DIY mini CNC
    By purple_rob in forum Gantry/Router Machines & Building
    Replies: 5
    Last Post: 03-08-2009, 11:08 PM
  5. Vertical moving gantry????
    By Ross77 in forum Gantry/Router Machines & Building
    Replies: 9
    Last Post: 03-06-2009, 08:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •