Threaded View
-
08-04-2016 #11
2 Jobs tested and in production :) 2nd one much less stress ;)
2010 screen-set, tool change routine...
On this job I did exactly the same as before but the first cutter seems to have run about 0.2mm lower than it should, made a bit more mess out of my bed but i'm not worried about that as it's buggered anyway ;)
The next two tool changes worked perfectly and did not gouge the bed.
Anything that can cause this?
I have verified the code and all parts are cut to the same depth.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Beginner Moving Gantry Build? Read This!
By Tenson in forum Gantry/Router Machines & BuildingReplies: 3Last Post: 23-05-2018, 05:30 PM -
Garage CNC - A gantry style machine design
By fandango in forum Gantry/Router Machines & BuildingReplies: 14Last Post: 21-03-2014, 01:38 AM -
Truss style Gantry
By D.C. in forum Gantry/Router Machines & BuildingReplies: 28Last Post: 15-12-2012, 07:23 PM -
A few questions to start a DIY mini CNC
By purple_rob in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 03-08-2009, 11:08 PM -
Vertical moving gantry????
By Ross77 in forum Gantry/Router Machines & BuildingReplies: 9Last Post: 03-06-2009, 08:34 PM
Bookmarks