. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    JRR's Avatar
    Lives in Vancouver, Canada. Last Activity: 31-05-2018 Has been a member for 5-6 years. Has a total post count of 12.
    I've played with the Arduino and understand it, although I did buy a Raspberry Pi to try out and may as well try that. I was indeed looking for more control over the press cycles, in the hopes of making parts larger than the 2 gm ones the machine can currently run off.

    I am actually only looking to do runs of a few hundred parts at most for the unit. This machine is overkill for that sort of thing, but the runs are probably too much for hand operated machines.

    That video IS of my machine (same blemishes on the rods that show about 55 seconds in), although it was sold to the person I bought it from and they kept the water cooling machine.

    What other machines are out there that may be more suited for parts up to about five square inches with runs of only a few hundred? I really bought the Rabit on a whim, so while I am interested in using it, I am also open to considering other options - like selling it to buy machines closer to what I need.
    Last edited by JRR; 11-05-2016 at 06:14 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. My first injection mold and the Rabit HY-4 injection molder
    By gavztheouch in forum Moulding Machines
    Replies: 46
    Last Post: 13-11-2017, 03:22 AM
  2. eBay: Another Austin Allen GNAT injection moulding machine
    By steve400 in forum Items On eBay UK
    Replies: 1
    Last Post: 24-06-2015, 11:36 AM
  3. eBay: Austin Allen GNAT Injection Moulding Machine - runs on 240V
    By steve400 in forum Items On eBay UK
    Replies: 2
    Last Post: 19-04-2015, 05:36 PM
  4. Spare Capacity?
    By Lance in forum General Electronics
    Replies: 0
    Last Post: 25-05-2011, 10:49 AM
  5. Increasing timing pulley bore size from 3mm t0 3.175mm
    By divdav in forum Gantry/Router Machines & Building
    Replies: 2
    Last Post: 14-05-2011, 09:45 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •