. .
Page 1 of 2 12 LastLast
  1. #1
    Ive searched for this information but I'm missing something i want to setup in the Port and pin menu to trigger rely for plasma torch.thank for any help

    Sent from my SM-G361F using Tapatalk

  2. #2
    It's not hard just setup the Output Number with the pin numbers your using on your Bob. Then in spindle setup for CW select the output # you used for M3.
    Now when you push Torch on it will be like calling M3 which turns on output#.

  3. #3
    Still can figure it out can you give me a bit more detail sorry

    Sent from my SM-G361F using Tapatalk

  4. #4
    Has your BOB got a relay on it?

  5. #5
    No rely but has one fitted separately.

    Sent from my SM-G361F using Tapatalk

  6. #6
    Hmm, the signal in to the relay is a green wire but all the BOB wires are white?

    Somewhere, that relay should connect to one of the output pins on the BOB, lets call it PinX, in Ports & Pins you need to set output for spindle to X then in spindle settings set M03 CW & CCW to X as well.

    I think that should do it.

  7. #7
    Quote Originally Posted by whensparksfly View Post
    Still can figure it out can you give me a bit more detail sorry

    Sent from my SM-G361F using Tapatalk
    No can't make it any clearer than that but I'll repeat it slightly different.

    Select Output you want to use in ports n pins/Outputs and enter the pin number your using on the bob.
    Next in spindle setup enter the Output # for CW M3.

    It's that simple.

  8. #8
    In the ports and pins
    Is it motor outputs or output signal ?

    In output signals is it digit trig?

    It also says spidle in motor out puts?

    Sent from my SM-G361F using Tapatalk

  9. #9
    On my setup It's Output #1 and in spindle setup just put 1 in the CW and CCW boxes.

    My BOB is configured for output 1 to fire the relay.

  10. #10
    Got it to work thanks .the only thing is it will power the relay at the start of a program and only stop powering it at the end of doesn't stop for cut changes and holes etc

    Sent from my SM-G361F using Tapatalk

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. eBay: new xtreme value plasma cnc machine complete setup £4260
    By rrossetti in forum Items On eBay UK
    Replies: 0
    Last Post: 22-02-2016, 10:14 PM
  2. FOR SALE: 3 sets of 4 xl pulleys and a plasma machine torch
    By nobby in forum Items For Sale
    Replies: 0
    Last Post: 20-05-2014, 07:33 PM
  3. Plasma, Mach3, Sheetcam and a Proma Torch height controller..
    By Davek0974 in forum Plasma Table Machines
    Replies: 2
    Last Post: 14-04-2014, 03:49 PM
  4. controlling a stepper with a simple trigger switch
    By phill05 in forum Stepper & Servo Motors
    Replies: 13
    Last Post: 06-02-2014, 02:18 PM
  5. Replies: 12
    Last Post: 25-05-2013, 12:41 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •