Thread: Motor tuning mm for plasma
You should start somewhere within the ball park the calculations are all listed in the mach3 manuals which again can be downloaded for free at artsoft.
Last edited by lucan07; 26-05-2016 at 07:27 AM.
It's worth asking on the Mach3 forum which version is best for your application, latest is not best for all applications, new bugs were introduced as old ones were fixed.
Last edited by magicniner; 26-05-2016 at 08:22 AM.If you will not be swayed by logic or experience simply pick the idea you
like best, but ask yourself why you sought advice in the first place and,
for a simple life, perhaps consider not doing so in future
I beleve I have it sorthed using the automatic motor tunning in the setting menu. Thanks everyone for all your help☺☺☺☺
Sent from my SM-G361F using Tapatalk
By glynster in forum General ElectronicsReplies: 15Last Post: 14-03-2015, 11:27 PM
By Davek0974 in forum Plasma Table MachinesReplies: 0Last Post: 12-02-2014, 09:45 AM
By Jonathan in forum GCODEReplies: 0Last Post: 07-03-2013, 01:49 AM
By Kevin1970 in forum Artsoft MachReplies: 6Last Post: 13-06-2012, 09:22 PM