Thread: Closed Loop steppers
-
18-07-2009 #11
yeh I was going to chop a little out of the legs to get it closer to the deck to improve the stability, also the head does not move down any where near the base plate so it needs to drop down.
Thanks for the help you guys, so to recap:
Ditch the Vexta motors
Buy two new 34 frame motors
Drop the height of the x, y & z axis closer to the table
But what kit do I need to get this running? drivers, breakout etc?
-
18-07-2009 #12Visit Us: www.automationshop.co.uk
-
18-07-2009 #13
Ok, so is any better than others as there seems to be a lot about?
Also the software side, we use Machine Strat, Delcam & Bobcad here. Do the drivers need specific headers in the G-code text to run?
-
18-07-2009 #14
Just Looking through a box of old motors I have here at work,
There are three with the following detail
1.8 degree step, Holding Torque 550mNm
2 VDC 2.8A
Are these any good? Noticed that you put down a torque of 3Nm so what is mNm?
-
18-07-2009 #15Visit Us: www.automationshop.co.uk
-
18-07-2009 #16
these drivers sound a little like me!!:dance:
-
18-07-2009 #17Visit Us: www.automationshop.co.uk
-
18-07-2009 #18
I want to build a router out of it, mostly for machining wood, but would like the ability to do the odd ally job too.
-
18-07-2009 #19
why, what wrong with it?
-
18-07-2009 #20
Maybe so but it’s a lot better than some of the tat I have seen floating around, thats for sure. I don’t need a massively robust machine, I own an aerospace tool room with many CNC machines, I just need this machine to help my dad who sits at a desk making 100's of wooden miniatures by hand, as his part time business. Just wanted to help him out a bit.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Controller for 8NM closed loop leadshine drivers
By Matt81 in forum Motor Drivers & ControllersReplies: 5Last Post: 19-06-2014, 09:08 AM -
FOR SALE: SuperPID v2 (Closed-loop PID Router Speed Controller)
By Mad Professor in forum Items For SaleReplies: 18Last Post: 23-04-2013, 10:48 AM -
Testing Leadshine closed loop stepper system.
By JAZZCNC in forum Stepper & Servo MotorsReplies: 10Last Post: 13-10-2012, 05:39 PM -
Closed Loop Stepper Compared with Open Loop Stepper
By Leadshine-Erci in forum Stepper & Servo MotorsReplies: 0Last Post: 25-05-2012, 08:11 AM -
Droping Steps, closed loop ? HELP !!!
By bobin in forum Machine DiscussionReplies: 7Last Post: 20-05-2009, 03:56 PM
Bookmarks