. .
  1. #1
    Hi, I am using EMCO WIN32 Concept MILL. Now an error message appears as "BOOT ERROR 0019; Error registering a font!' and 'The instruction at "0*00412c2a" referenced memory at "0*00000462'. The memory could not be read'
    Click on OK to terminate the program.

    Can anyone give me a solution to this problem?

  2. #2
    Bump...Bump
    .Me

  3. #3
    I know nothing of this machine, but the bios and eproms on PC motherboards can cause such errors when the backup batteries are low and they have been powered down for a while (normally 2032 3v coin batteries). If the machine has been disconnected from the power or powered down for any length of time recently I would check the board for such backup batteries and if possible replace, it is possible that on older machines it may be a PCB mounted rechargeable battery in which case not so simple.

  4. #4
    Quote Originally Posted by lucan07 View Post
    I know nothing of this machine, but the bios and eproms on PC motherboards can cause such errors when the backup batteries are low and they have been powered down for a while (normally 2032 3v coin batteries). If the machine has been disconnected from the power or powered down for any length of time recently I would check the board for such backup batteries and if possible replace, it is possible that on older machines it may be a PCB mounted rechargeable battery in which case not so simple.

  5. #5
    Thanks for your reply and suggestion. I have rectified it. Completely drained air from the machine, then switched on, its working !!!!!!!!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Emco pc mill 55 upgrade
    By Craiggillzzr1400zx10r in forum Emco Milling Machines
    Replies: 30
    Last Post: 31-08-2016, 03:13 AM
  2. FOR SALE: Emco mill 50 for sale
    By gavztheouch in forum Items For Sale
    Replies: 0
    Last Post: 05-04-2016, 07:37 PM
  3. CONVERSION: Emco Mentor Mill conversion
    By Ross77 in forum Conversion Build Logs
    Replies: 63
    Last Post: 13-01-2016, 06:40 PM
  4. FOR SALE: Emco mill 50 cnc mill like Denford Triac
    By gavztheouch in forum Items For Sale
    Replies: 0
    Last Post: 18-05-2014, 10:19 AM
  5. Emco mill 50 Y axis travel?
    By gavztheouch in forum Emco Milling Machines
    Replies: 0
    Last Post: 01-03-2014, 11:10 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •