. .

Thread: Keyed shafts

  1. #1
    Hi all I'm after some keyed shaft stock. I would need a few 300mm lengths of 12mm silversteel or similar bearing/bushing friendly material with 3mm keyways. Does anyone have any sources of where to buy this kind of thing? I don't have any friendly local places I can take some material to get machined sadly so that's not an option. If not is it best I put up a RFQ?

    Thanks,

    Harry.

  2. #2
    If you can cut keys or get done locally I use these for odds and ends they used to stock 300mm as standard seems to be 333mm now, delivery usually next day would be very surprised if not a small shop to do these near you, even a dremel and vice would possibly do trick depending on accuracy required and patience.

    https://www.cromwell.co.uk/shop/materials-and-maintenance/silver-steel/silver-steel-metric-round-sizes/f/1579?6292=12.
    Last edited by lucan07; 02-06-2016 at 03:23 PM.

  3. #3
    Misumi would be my first bet
    https://emvioeng.com
    Machine tools and 3D printing supplies. Expanding constantly.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 24-09-2014, 09:57 AM
  2. Shafts, bearings and circlips....
    By irving2008 in forum Linear & Rotary Motion
    Replies: 7
    Last Post: 01-10-2013, 10:52 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •