so following on from this threat I decided to do some R&D with different glues and ive found a winner.

http://www.screwfix.com/p/no-nonsens...ve-200ml/41795

I also purchased the cheapest 50mm wide masking tap from screwfix and it all worked a treat.

I used this method but with the glue from screwfix



just done the below, its pretty small at 100mm by 100mm but the gluing method worked 100% perfect and just popped right off once I was finished. I only used a tiny bit of glue so its going to last ages. it dried and was rock solid in about 30 seconds



next I want to try cutting letter out like this