I would like to sell my CNC DIY milling machine.
But how much could I get for it?
Working area : 410mm x 350mm
Spindle : Kress 800 FME (German)
Motors: 3x Nema 23 1.9Nm 3A 57BYGH627
Drivers: 3x DQ542MA
Motherboard: LPT SSK-MB2
-All axis drived by 1204 ballscrew with nuts.
-all axis supplied with end stops switches
- base of machine 8mm mild steel and blue painted (car paint)
- X Y Z carriges made from aluminium (X bridge 8mm aluminum, Y carriage 10mm alu, z carriage 8mm alu)
- X axis 20mm not supported rails
- Y Z 16mm rails with supports
- maximum volecity about 1800 mm/min
-outlets for oil and air (cooling mist system)
- little compressor made from fridge refrigerator, and fire extinguisher.
- perystalitc pump for oil mist sytem included
- all electronic in nice cabinet made from 3mm aluminium with bid 120mm fan.
- Sound absorbing box with 35mm triangle foam (overall box dimensions L 800 x W 800 x H 650)
- laptop Acer TravelMate 280 with LINUXCNC software.
- I can include CAMBAM software for gcode generating.
Machine fully working and ready to work.
EXamples made on this machine:
Photos of machne:
Last edited by adrpak; 11-06-2016 at 04:16 PM.
Although I`m not the buyer but I absolutely love 3 things about your machine:
1. Electronics enclosure
3. Peristaltic pump
All the best!
By Tolly1972 in forum Milling Machines, Builds & ConversionsReplies: 2Last Post: 11-02-2016, 08:28 AM
WANTED: CNC Milling MachineBy Chaz in forum Items WantedReplies: 2Last Post: 15-06-2015, 07:56 AM
WANTED: cnc milling machineBy bigred5765 in forum Items WantedReplies: 14Last Post: 25-04-2014, 10:08 PM
WANTED: X3 CNC milling machineBy Nemo1966 in forum Items WantedReplies: 1Last Post: 09-11-2013, 09:42 PM