CNC DIY milling machine . I am considering sell it.

[adrpak]

Hi.
I would like to sell my CNC DIY milling machine.

But how much could I get for it?

Working area : 410mm x 350mm
Spindle : Kress 800 FME (German)
Motors: 3x Nema 23 1.9Nm 3A 57BYGH627
Drivers: 3x DQ542MA
Motherboard: LPT SSK-MB2

-All axis drived by 1204 ballscrew with nuts.
-all axis supplied with end stops switches
- base of machine 8mm mild steel and blue painted (car paint)
- X Y Z carriges made from aluminium (X bridge 8mm aluminum, Y carriage 10mm alu, z carriage 8mm alu)
- X axis 20mm not supported rails
- Y Z 16mm rails with supports
- maximum volecity about 1800 mm/min
-outlets for oil and air (cooling mist system)
- little compressor made from fridge refrigerator, and fire extinguisher.
- perystalitc pump for oil mist sytem included
- T-bed


- all electronic in nice cabinet made from 3mm aluminium with bid 120mm fan.
- Sound absorbing box with 35mm triangle foam (overall box dimensions L 800 x W 800 x H 650)
- laptop Acer TravelMate 280 with LINUXCNC software.
- I can include CAMBAM software for gcode generating.

Machine fully working and ready to work.



EXamples made on this machine:





Photos of machne:


Compressor:


Perystaltic pump

[toomast]

Hello sir!
Although I`m not the buyer but I absolutely love 3 things about your machine:
1. Electronics enclosure
2. Compressor
3. Peristaltic pump

All the best!