Thread: Quote for building a CNC Router
Please forgive my laymen wording, I am not great with the terminology and the technical jargon, I will outline what I want to do with a machine, then please, if you don't mind, can I perhaps get a quote for building a machine for me?
I want to cut MDF, in sheets of up to 18mm thick, and in sizes up to 1000mm x 600mm or so.
Mainly letters, shapes, small furniture items (Children's stools etc)
I will be hopefully cutting for a few hours every day. I was looking at the Stepcraft Machine but this is really just a hobby machine and needs to be switched off every 15 mins or so. (When using a lower end spindle)
I am not sure what other info you might need at this point, and I hope I have reached out to you all on the correct forum page.
Thanks in advance
BUILD LOG: 1.7*0.74*0.4m Mill / Router building...By Jonathan in forum DIY Router Build LogsReplies: 148Last Post: 26-04-2014, 03:36 PM
By Gtee87 in forum Gantry/Router Machines & BuildingReplies: 26Last Post: 24-02-2014, 01:42 AM
NEW MEMBER: new member building a cnc routerBy steeplejack in forum New Member IntroductionsReplies: 0Last Post: 30-01-2013, 05:10 PM
By HankMcSpank in forum General DiscussionReplies: 31Last Post: 02-03-2010, 09:21 AM