. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 06-07-2016 #1
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom.
    Clive S
    Current Activity: Viewing MYCNCUK Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 3,333. Received thanks 618 times, giving thanks to others 78 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    Quote Originally Posted by Lee Roberts View Post
    I don't need one just yet but I was wondering what people are/have used for tooling in the Chinese water cooled spindles to fly cut their machine bed flat and true?

    On my first "real" machine I'm building, the cutting area is smaller than the bed size, so I'm thinking I need something with a bit of reach to get at the full bed please.

    Thanks

    .Me
    Lee something like this http://www.wealdentool.com/acatalog/..._Wing_250.html but you can get cheaper if you shop around.


    You don't need to surface the whole bed in fact you will end up with a nice reference edge to put parts against
    ..Clive
    The more you know, The better you know, How little you know
    Reply With Quote Reply With Quote

  2. The Following 2 Users Say Thank You to Clive S For This Useful Post:

    Lee Roberts, toomast
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Chinese 300W DC spindle - is the spindle shaft grounded?
    By HankMcSpank in forum Spindles & Drive Motors
    Replies: 44
    Last Post: 26-11-2016, 07:25 PM
  2. TB6560 controller Runs spindle on power up When Mach3 plunges spindle stops
    By RoyT in forum Spindles & Drive Motors
    Replies: 5
    Last Post: 29-09-2014, 02:42 PM
  3. CNC Spindle Repair and Spindle Replacement for any Machine of any Manufacturer
    By spindeldoctor in forum Manufacturer News
    Replies: 0
    Last Post: 13-11-2013, 07:50 PM
  4. Spindle lock mechanism for 2.2kW china spindle
    By Jonathan in forum Generic Chinese Spindles
    Replies: 8
    Last Post: 13-08-2012, 08:39 PM
  5. DIY Spindle - What type of bearings are best suited for a spindle.
    By 8iggles in forum Spindles & Drive Motors
    Replies: 18
    Last Post: 09-02-2011, 10:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules