Thread: Having a go with F360....
Threaded View
-
11-08-2016 #1
Ok, so I'm average on Vectric Aspire and SheetCam but want to learn basics in F360 - i like the assembly stuff and 360 aspect of design that the other apps lack.
Have watch a few videos but find the best way to learn is to pick something representative of a project either past or future and try designing it.
Here we go, not to any scale and only the first steps of the part.
I drew the stock, added two circles and then the slot on one.
Doing the cam and a simulation it wants to cut round the whole part - presumably because it is following the path through the slot.
Say i wanted to mill the holes out then do the outside then add the slot, what process should i be following?
Would the slot be a separate setup or separate file/code etc?
Apologies for basic questions but searching for this would probably take a long time ;)
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks