Help with Problem X axis Stepper Please

[cropwell]

I had a couple left behind by an electrician after some work in the house which I have used on my own router and like you, I crimped on ferrules to stranded wires. They seem very effective, slightly larger than the equivalent choc block but easier to wire. I just left mine floating in one of the plastic boxes I use as junction boxes (which I was buying from Maplin but now 3d print).

Wago do junction boxes, you might like to adapt your 3D prints accordingly http://www.screwfix.com/p/wago-abox-...Fa237QodaegHvA

[Neale]

Custom printed boxes including guides for the Wago connectors, which could be tweaked to suit whatever combination of connector sizes needed. Sounds like a neat idea - thanks for the pointer, Rob.

[cropwell]

Custom printed boxes including guides for the Wago connectors, which could be tweaked to suit whatever combination of connector sizes needed. Sounds like a neat idea - thanks for the pointer, Rob.

You could also print these https://www.tlc-direct.co.uk/Products/WA332.html

[Neale]

Now those do look like a good idea, and cheap as well. Look much easier to use than screwdown DIN terminals which are a pain to use in a crowded control box.