Hi there, I’m looking for a software package or solution that will take a black and white image and create mach 3 g-code within pre-set parameters of tool size, speeds and feeds, it would require that one colour (e.g. black) would be removed to a depth of 2.5mm, leaving the other colour (e.g. white) as the upper surface. Ideally the programme would do this with as liitle additional input as possible and produce code that can be directly used to mill the physical form

I’ve seen that this is the way that chemical etchers work for creating patterns in zinc plate, id there anything transferable from the software used here that anyone knows about?