Hey guys,

Ive just bought another machine and have had to strip the board out of it in order for it to work. Ive now stuck my spare EDINGCNC CP5 board in, however, doing this as you know i have to set the steppers etc up again.

The machine come with the following:

90 tooth pulley on the pinion
18 tooth on on the motor side
HTD500 5M Belts

Stepping leadshine drivers are set to 1600 steps per revolution @ 8 microsteps via dipswitches

Maybe its just a brain fart, but im struggling to work this out more so the ratio of the belt and pulley so if someone can give me the easy way that would be great