-
02-07-2017 #21
-
02-07-2017 #22
-
02-07-2017 #23
It would be helpful to see what's on the disk, as I'd hope it would contain a configuration file.
How big (in MB!) is everything on the disk? Would it be possible to add all the files on the disk to a ZIP, and upload it somewhere?
Ultimately you'll need to follow these instructions - https://github.com/gnea/grbl/wiki/Compiling-Grbl
And then to test if it's successfully flashed to the board, open the terminal within the Arduino software, type and send '$' to see if you get a response as per - https://github.com/gnea/grbl/wiki/Grbl-v1.1-CommandsAvoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
03-07-2017 #24
Can it flash the arduino?
http://blog.protoneer.co.nz/quick-gr...e-interpreter/
If you follow this guide make sure you change the device settings that says mega to 328p (Might be listed as nano, think Uno works fine to)http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm
If you didn't buy it from China the company you bought it from did ;)
-
03-07-2017 #25
-
03-07-2017 #26
-
03-07-2017 #27
-
03-07-2017 #28
Yes, I got it.
I'm on late shift this week, so only just got home.
There's nothing in that archive that relates to the actual programming of the board, however it all references using version 0.9. Given everything references 0.9, it's probably wise to try reflashing 0.9.
Try following the guide at the top of this page - https://github.com/grbl/grbl/wiki/Compiling-Grbl
Download the grbl 0.9 files via this link - https://github.com/grbl/grbl/archive/master.zip
And the main Arduino IDE software at https://www.arduino.cc/download_hand....3-windows.exe
Let us know how you get on following that guide. And if you manage to establish any kind of communication with the board.Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
What desktop cnc
By fbiiburton in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 28-08-2015, 04:10 PM -
1605/1610 have they sent the wrong ones?
By kingcreaky in forum Lead Screws, Nuts & SupportsReplies: 4Last Post: 30-07-2013, 09:22 PM -
Desktop cnc, HELP
By Walkz69 in forum Machine DiscussionReplies: 1Last Post: 25-05-2013, 11:30 AM -
CNC Desktop Lathe
By yadu in forum General DiscussionReplies: 3Last Post: 16-01-2011, 11:07 AM -
Stiff 1610 ballscrews, need help.... asap.
By ccmarco in forum Lead Screws, Nuts & SupportsReplies: 10Last Post: 05-12-2010, 10:01 AM
Bookmarks