Thread: How do I do this?
Hybrid View
-
Open too all suggestions just need it to look good as I totally bullshitted her that I could do it lol.
http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm
If you didn't buy it from China the company you bought it from did ;)
-
31-07-2017 #2
Desertboy,
Just so you know, I'm not guessing or having a stab at some idea, working with wood is what I do.Spelling mistakes are not intentional, I only seem to see them some time after I've posted
-
The Following User Says Thank You to EddyCurrent For This Useful Post:
-
http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm
If you didn't buy it from China the company you bought it from did ;)
-
01-08-2017 #4
Desert, here is a nice video by Mitch Peacock showing how to do a bridle joint by hand if you fancy having a go.
My experience with tenon's and half lap's is mostly at the "first fix" level, I generally do this using a mitre saw via the blade depth stop, tuning with a wood chisel as needed, at that level it obviously doesn't need to look too beautiful but I've also used this method to make a few shaker style cabinet doors here and there with great results, if you score your lines with a scoring knife (stanley blade) you can get the finished joints looking clean and crisp..Me
-
The Following User Says Thank You to Lee Roberts For This Useful Post:
-
http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm
If you didn't buy it from China the company you bought it from did ;)
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks