carving issues-UNSOLVED

**phill05** · 10-10-2017

Yes mate on it now

**woodworker** · 13-10-2017

awesome

**cropwell** · 13-10-2017

If you are ready to skip it, I am fairly close to you

PM me with your phone number and we can talk through the problem.

**cropwell** · 13-10-2017

Could you have a problem with your power supply overheating and going into temporary shut down while it cools for a second ? What controller have you got?

**woodworker** · 10-10-2017

awesome thank you

**woodworker** · 10-10-2017

cheers Phill will let you know tomorrow

**woodworker** · 11-10-2017

Hi Phill
Same unfortunately the tap file cut ok for around 5 cuts then went left by approx 20mm (the bit doesn't like being shoved across a thick piece of wood) and the second file cut to the right approx the same at least I can rule out Aspire as the culprit, going to make a phone call me thinks.

**woodworker** · 11-10-2017

Solved turns out my Mach 3 copy is corrupt what did I expect as it came with my long dead Chinese laser machine so I now need to purchase a new Mach 3. Big thanks to Phill for going beyond the call really helped me nail down the issue.

**cropwell** · 11-10-2017

If you purchased a proper licence, then you should be able to download Mach3 and use the same licence. If the licence came with the Chinese laser, then it is probably a 'pirate' and the download won't work with it.