Chinese 4 x 4 production grade machine - Brands names to look at it steer clear of?

**SweetAs** · 26-05-2018

Morning!

So I'm on the look out for a 4 x 4 CNC from China. Do you guys have any specific brands or people I should speak to?

We are a UK based wood machining company and picked up a 1300 x 900 laser machine from HSG. We managed to get a great deal as we brought it direct from the factory. Now we are hoping to do the same to upgrade our Router.

I fully understand the pitfalls of buying from China. We spent approximately 6 months researching and discussing with various agents and factories. There is a huge difference in build quality, I mean it's absolutely HUGE and we have ended up with a very capable machine, albeit afyer a large amount of work and stress. If we had bought the same machine in the UK it would have cost upwards of 3 times the price so it was a worthwhile investment.

I would love an 8 X 4 but it would just make the workshop too tight so I think 4 x 4 would be the best option.

Ideally it would have an auto tool changer as we will use it for sign writing so it saves the hassle of changing over for the fine work.

It also needs to be able to handle production level work so it has to be accurate and quick. Most of the work will be 2D cutting but I really want to use it for 3D in the future.

Vacuum table is something we are after.

We have been looking at the one on the link below but could use some advice if people have had good or bad experiences with specific companies.

Ask any questions you need to, cheers for the help in advance.

https://app.alibaba.com/dynamiclink?...areScene=buyer

**SweetAs** · 28-05-2018

Anyone have any ideas? Should I post this in another section?

**mekanik** · 28-05-2018

Hi
The forum seems a little quite @ the moment,peep's might be on holiday. i am sure someone will chip in later. do you have a budget?
It's difficult to get an idea of the rigidity as all it says is welded construction, i would be wanting ballscrews on X & Y also.
Hopefully some one might have some experience of this manufacturers kit and post a reply.
Regards
Mike

**SweetAs** · 29-05-2018

Thanks for the reply, I'll just keep coming back to check Then!

In terms of budget, it's really dependant on what is needed to be spent if I'm honest. I would love to know how decent these 3-5000 machines are when shipped over. Ideally I need something that is fairly turn key to operate. I would love to build one again but sourcing all of the parts will be another learning curve and not sure I have time for it. I might have a look to see if there are any plans out there for a full build but would love to just plug it in and start fettling lol

We heard alot of horror stories when we purchased the laser machine but eith some checking and alot of effort we did really well out of it.

Fingers crossed someone might have some info :-)

**mekanik** · 29-05-2018

Hi
Have another option you might want to look into. There are members of the forum that actually build machines. If you make a post in the freelance jobs and requests section someone might be able to help, there is at least one member that has built some cracking machines for other members of the forum and you would struggle to find anything commercially available at the same quality for the same money.
Hope this is of some help.
Regards
Mike

**SweetAs** · 29-05-2018

Ok Mike I will do that while I'm waiting for some replies. Any threads I should look at first? Cheers for all the help!

**Andy Xing** · 27-08-2018

Hi,
The forum seems very quite. About Chinese cnc router, I can offer you some helps. I am been in cnc industrial for many years.
I can offer you some advice and technical support.

**Turna** · 25-09-2018

Originally Posted by Andy Xing

Hi,
The forum seems very quite. About Chinese cnc router, I can offer you some helps. I am been in cnc industrial for many years.
I can offer you some advice and technical support.

Hi Andy

Can you give any help on JIACHEN 1216DS, need help with driver for hand held controller or instruction manual for machine would be great.

Sent from my SM-G965F using Tapatalk

**Andy Xing** · 26-09-2018

Hi, Turna,

I don't know about the model Jiachen 1216DS. Is it working with the DSP hand controller? If so, I can send you the guide manuals.
Did you already get the machine? do you have any photos about it?

**Turna** · 26-09-2018

Originally Posted by Andy Xing

Hi, Turna,

I don't know about the model Jiachen 1216DS. Is it working with the DSP hand controller? If so, I can send you the guide manuals.
Did you already get the machine? do you have any photos about it?

Hi Andy

Thank you bud, yes I have machine now, if you have the guide manuals that would be a great start.

Here are some pics too if that helps.

Sent from my SM-G965F using Tapatalk