Thread: CNC Turning advice
Threaded View
-
07-09-2018 #1
Wish to cut some simple pipe bending rollers with a half round edge grooves 1/8, 3/16, 1/4 etc.
Programming is simple, but :-
Tooling :-
First option is to use >1/8" RNMG insert but of course too small to be practical.
2nd - Make an HSS form tool with side relief. Possibly on a parting blade. Difficult to get the rad. accurate?
3rd - Use a 35 deg 04mm rad tool and approach from two sides with R&L/H tool.
Any advice on good way to CNC these grooves very much appreciated.Last edited by Leadhead; 07-09-2018 at 07:26 AM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
RFQ: RFQ - Aluminium turning - 1 off
By robhooley167 in forum Projects, Jobs & RequestsReplies: 0Last Post: 06-12-2015, 12:41 AM -
Advice on turning a part
By charlieuk in forum Metalwork DiscussionReplies: 15Last Post: 31-08-2014, 10:38 AM -
2 turning ops or more on solidcam?
By eamo1978 in forum SolidworksReplies: 6Last Post: 25-06-2014, 10:57 AM -
RFQ: Parts need turning
By ams in forum Projects, Jobs & RequestsReplies: 17Last Post: 15-01-2014, 12:27 AM -
RFQ: Some turning required please
By drumsticksplinter in forum Projects, Jobs & RequestsReplies: 5Last Post: 16-04-2013, 06:15 PM
Bookmarks