Anyone got a flatbed vinyl cutter?

[magicniner]

Some non-flat bed plotters can accept a backing board and will then run the jobs you think you need a flat bed for ;-)

[Lee Roberts]

There is a few different versions of basically the same thing out there but the Stanley Blade version seems to be quite popular, couple of designs on GrabCad if you fancy making your own: https://grabcad.com/library?page=1&t...y=drag%20knife

If not then you can just buy the cutter holder as a spare part for a commercial vinyl cutting machine and make it fit your machine spindle/collets, I guess you could probaly even do away with the holder and just make something to hold the vinyl cutting blades...



Can get them quite cheap on ebay now days:

Link: PC-Roland-GCC-Cutting-Plotter-Vinyl-Cutter-Blade-w-Holder-30-45-60-Degree-15pcs

Link: 1-pcs-45-Cutting-Plotter-Vinyl-Cutter-Knife-Blade-for-Roland-GCC-LiYu

[andy_con]

There is a few different versions of basically the same thing out there but the Stanley Blade version seems to be quite popular, couple of designs on GrabCad if you fancy making your own: https://grabcad.com/library?page=1&t...y=drag%20knife

If not then you can just buy the cutter holder as a spare part for a commercial vinyl cutting machine and make it fit your machine spindle/collets, I guess you could probaly even do away with the holder and just make something to hold the vinyl cutting blades...



Can get them quite cheap on ebay now days:

Link: PC-Roland-GCC-Cutting-Plotter-Vinyl-Cutter-Blade-w-Holder-30-45-60-Degree-15pcs

Link: 1-pcs-45-Cutting-Plotter-Vinyl-Cutter-Knife-Blade-for-Roland-GCC-LiYu

Looks perfect thanks

Where could I buy one like the one in the YouTube video?

I don't understand how the ebay link one works?