Threaded View
-
18-07-2020 #1
Hi all, i am new into this forum and i come to ask for some help as i can't manage to find the solution to my problem. Please, if anyone has an explanation regarding this phenomenon. All wiring is multiple checked, in jog mode works fine, in MDI mode works fine, when cutting it works fine. No loosing steps. I can't figure out why it happens when i do tool probe or axis calibration. Before uc400 i had a chinese usb motion control card and never had problems like this.
https://www.youtube.com/watch?v=zydpSAkk04o
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Mesa Control Card Recommendation
By JackDavies in forum Control Hardware & SystemsReplies: 3Last Post: 20-05-2021, 02:17 PM -
MK4 MACH3 Motion Card Problem with output control ports. NEED HELP!
By Mushtantuk in forum Motor Drivers & ControllersReplies: 0Last Post: 18-06-2017, 02:36 PM -
Denford TRIAC motion control card
By Tommy in forum Denford MillsReplies: 0Last Post: 12-01-2017, 09:55 AM -
Denford TRIAC motion control card
By Tommy in forum Tool & Tooling TechnologyReplies: 0Last Post: 12-01-2017, 09:44 AM
Bookmarks