Threaded View
-
23-01-2021 #1
Hi all hope you are all well. I have a problem with my diy router. On my x axis I have 2 ballscrews belt driven by one motor. If I move it in the negative direction it is fine, can get up to 10m/min. When I move it positive it stalls immediately. I have disconnected the belt and the motor will go both directions up to 20m/min. Reconnect again and it stalls. What could be the problem?
I can move the axis in both directions by hand easily when the belt is disconnected. Thanks in advance
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
A and Y Axis travel in opposite direction,when Ref Home is Pushed
By Andyshomecrafts in forum General DiscussionReplies: 1Last Post: 29-01-2017, 11:32 AM -
Axis direction help please?
By examorph in forum General DiscussionReplies: 2Last Post: 24-01-2017, 06:30 PM -
x-axis on Orac losing direction
By asto in forum Motor Drivers & ControllersReplies: 3Last Post: 29-03-2013, 01:22 AM -
problem: y-axis only moves in one direction using TB6560 board off email
By polysoul in forum Machine DiscussionReplies: 9Last Post: 08-06-2012, 12:12 PM -
Upgraded leadscrew now stepper stalls on Z axis. What are my options?
By BigAl in forum Stepper & Servo MotorsReplies: 2Last Post: 22-11-2011, 01:01 PM
Bookmarks