Thread: My new machine - Guess the make!
-
30-03-2021 #81
Not the sort of amateur mistake I’d make! You forget, I have nearly 8 weeks of experience under my belt
-
02-04-2021 #82
-
02-04-2021 #83-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
02-04-2021 #84An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.
-
03-04-2021 #85
I joined team JazzCNC on Wednesday and had a great day taking delivery of machine from Dean and his son. They took me through the machine really comprehensively and Ive since had a bit of time getting to grips with it. I wanted a CNC primarily for guitar building so today I decided to jump in and cut a test body. I scaled my model down to 30% in Fusion and set about greating the g code for it. Using a combination of straight cutter and ball nose for the carved top gave me a bit of experience in tool changes within the same job , basic stuff no doubt for you seasoned machinists, but a confidence booster for me, knowing I could carry out the work flow correctly. The machine is a beast !! I don't have much for a reference save for my mates massive SCM machine but my little Jazz 9060 punches above its weight for sure.....
Now that Im up and running I hope to be able to contribute here and show you some of the things I make on my new journey .
Thanks again to Dean and Jared
-
04-04-2021 #86
Looking good so far beeceuk. You could make that into a violin!
-
04-04-2021 #87
Thanks dean. But with my blunt Irwin saw and wood chisels that have split bricks, I don’t think it would have turned out quite the same! But I certainly see your point.
Next week is carving week. Got a ridiculous project in mind that Aspire recons is 72 hours cut time. “Run from here” and “feed hold” at the ready!
-
09-04-2021 #88
-
17-04-2021 #89
-
The Following User Says Thank You to Pilsbury For This Useful Post:
-
17-04-2021 #90
Under the circumstances we'll excuse you the requirement to cut an Aztec calendar to join the 'real men' of CNC.
KitAn optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.
Thread Information
Users Browsing this Thread
There are currently 16 users browsing this thread. (0 members and 16 guests)
Similar Threads
-
How tricky would this be to machine? I guess a Triac is not up to the job!
By suesi34e in forum Metalwork DiscussionReplies: 21Last Post: 15-06-2016, 05:11 PM -
NEW MEMBER: CNC wanabee I guess.
By aliasant in forum New Member IntroductionsReplies: 2Last Post: 07-11-2014, 10:34 PM -
plasma advise sought, want to make a a3-a2 sized machine
By nobby in forum Plasma Table MachinesReplies: 1Last Post: 16-07-2014, 02:53 PM -
Make your own Super- PID ... not that hard to make ! .... says electronics genius!
By Buba b in forum General ElectronicsReplies: 4Last Post: 26-04-2013, 08:37 AM -
RFQ: help needed to make cnc machine maybe 2-3 and will pay
By scnc in forum Projects, Jobs & RequestsReplies: 10Last Post: 22-11-2012, 12:31 AM
Bookmarks