Threaded View
-
01-09-2021 #1
Hello, i have problem with huanyang VFD. It only turn at 1 speed via MACH 3 at same time cant change speed and software show 0 RPM even its turner on.
I use AXBB controller. Google solutions almost 2 days but havnt find anything works or i cant get what is a problem.
Set jumper to left (VI)
Set PD001 - 1
PD002 - 1
and other like youtuber 702marine, turning on with PD001/2 set to 0. Can control spindle speed via VFD.
Add pic how i connected it.
DCM (green) > 24V0
ACM (red) > 5V0
VI > AO1
REV (black/red) > O7
FOR (red) > O8
Guess i wire something wrong read that need 10V0 but cant find where to find it. And i know i need replay, but now just bench testing if everything works so guess its ok.
Will be grate if some one can explain to me what i doing wrong, its my first CNC machine and its really steep learning curve from setting everything up.
Ps. Steeper motors working fine. slave A to Y working synchro nicely.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
AXBB-E any opinions?
By ngwagwa in forum Motor Drivers & ControllersReplies: 12Last Post: 21-07-2021, 04:32 PM -
moving from Mach3 to AXBB
By ngwagwa in forum CNCdrive (UC100, UC300ETH)Replies: 5Last Post: 12-04-2020, 10:01 AM -
looking for a pendant to work with Cslabs ip-m mach 3
By charlieuk in forum CS-Lab (CSMIO)Replies: 7Last Post: 22-09-2017, 03:56 PM -
Cheap CNC breakout board for controlling spindle speed, will this work?
By ROBCNCAU in forum Spindles & Drive MotorsReplies: 7Last Post: 04-08-2016, 02:48 PM -
Mach lathe spindle speed control
By GeoffV in forum Artsoft Mach (3 & 4)Replies: 7Last Post: 21-05-2014, 08:34 AM
Bookmarks