Well the last two days I have spent a lot of time generating scrap :cry:

Drills breaking off in holes, holes bored too big because I forgot the clicks on the boring head were radius not diameter ( I'd remembered right up to the last but one cut :sad: ) and finally when I get everything else right, I went to tap out a 3mm hole and the tap snapped off in the hole... thought it felt tight, wasn't till after it snapped I looked closely... the plug tap was a 1/8BSW not an M3... this was a brand new 3tap set from RDG still in its plastic wrapping... never imagined one of them would be wrong.

Argggggggghhhhh