Hi all,
I've got a 8'x4' router with no manual or no knowledge about the machine.
It connects to the computer with a 15 pin connector (DB-15). Tried running it on the Mach3 software but it seems I have no connection at all.
I would like to change the control card to a USB or ethernet connection but I have no clue what to look for.
The machine has 4 of the DMA860H steppen drives installed if that's any help?
Any suggestions on what board to replace it with?

Click image for larger version.  Name: DSC_1040.jpg  Views: 53  Size: 245.6 KB  ID: 32100
Click image for larger version.  Name: DSC_1038.jpg  Views: 61  Size: 216.1 KB  ID: 32101
Click image for larger version.  Name: DSC_1036.jpg  Views: 48  Size: 164.3 KB  ID: 32102